|
 |
|
| Rollers |
 |
PU Sponge Rollers |
 APPLICATION：
Drying and removing water and liquids from PCBs, LCDs, and
glass (ideal for placement before drying ovens).
CHARACTERISTICS：
Soft and supple when dry, heat resistant(stable up to 120℃),
superb absorbency, highly resilient, can be used up to 5 times
longer than other sponge rollers, can sustain production speeds
of up to 6-8 meters/minute, and won’t shed. |
|
|
|
PVC Sponge Rollers |
 APPLICATION：
Drying and removing water, liquids, and chemicals from PCBs,
LCDs, and glass after chemical processes like etching, pattern
developing, and stripping.
CHARACTERISTICS：
Soft and supple when dry, stable up to 60℃,excellent absorbency,
high water retention potential, and high chemical resistance. |
|
|
PVA Sponge Rollers |
 APPLICATION：
Cost-effective method of drying and removing water and liquids
from PCBs. LCDs, and glass.
CHARACTERISTICS：
Most commonly used sponge roller in the PCB industry, soft
and resilient when wet (need to be thoroughly soaked in water
for 30 minutes before use and remain wet while in use)/ excellent
absorbency, and stable up to 60℃. |
|
|
PP Sponge Rollers |
 APPLICATIONS：
Prevent drag-out of chemical reagents from chemical processes
like etching, pattern developing, and stripping.
CHARACTERISTICS：
Strong chemical resistance and soft (can apply pressure and
create a larger contact surface area). |
|
|
CSQ Sponge Rollers |
 DESCRPTION：
A polyurethane roller that can be used for both absorbing
moisture and preventing drag out of chemical reagents. Our
CSQ roller has excellent chemical resistance, water absorption
ability, temperature resistance, and abrasion resistance (no
shedding). It stays soft and pliable without the need for
pre-soaking and can act as a squeegee to prevent the overflow
of reagents from chemical processes.
APPLICATIONS：
For use in water processing after etching, developing, and
stripping.. Used in the production of PCBs, LCDs, semiconductors,
metals, glasses, etc. |
|
|
Coating Rollers |
 DESCRIPTION：
Specially treated surface (grooved, interval distances, etc.)
lowers the amount of coating needed and extends the life of
the roller. In the PCB industry, liquid coatings will lower
costs by 30% as compared to dry films, and consistency will
be increased.
APPLICATION：
Can be used in coating machines made in Germany, U.S.A., Japan,
and Taiwan. |
|
|
Laminating Rollers |
 DESCRIPTION：
These rollers have high temperature resistance (operating
temperature:150℃-180℃), strong chemical resistance, and water
resistance. They will not chip, change shape, or blister,
and will stay stable and consistent through prolonged use.
APPLICATION：
Can be used in all laminating machines. |
|
|
Abrasive Rollers |
 DESCRIPTION：
There rollers have excellent leveling capabilities and are
used to clean, grind, and polish resins, metals, and laminates
to prepare the surface. They will lower the rate of defects
and increase yield and quality.
APPLICATION：
For use after surface roughening (black oxide), hole-drilling,
hole-filling, laminating, and electroplating. |
|
|
Rubber Rollers |
 DESCRIPTION：
High chemical resistance, wear resistance, and pliability
will increase our rollers’ usable lifespan and improve quality
control.
APPLICATION：
Used to transport boards and prevent drag-out of chemicals
in the etching, developing, and stripping processes. |
|
|
Cleaning Rollers |
 DESCRIPTION：
Specially formulated rubber rollers with superior tack and
heat resistance, and a long lifetime of repeated use.
APPLICATION：
Can be used for cleaning the surfaces of PCB's, metal plates,
glass panels, and foils. |
|
 |
Panel Trading Co.,LTD.
7th Floor,No.168,Song-Jiang Road,Zhong-Shan District,Taipei
City 10459,Taiwan.
TEL：+886-2-25711191#201 FAX：+886-2-25641810
E-mail Address：chemical@panel.com.tw |
|
|
|
 |
|
|