Offers optical &semiconductor package &electrical parts assembly adhesives, and process machine for battery cells,solar wafer, Marine machinery . The Unit provides optimal processing material and equipment solutions based on the processing needs of customers.
+886-2-2571-1191#300-309
+886-2-2564-1810
nakahico@panel.com.tw
Main Products: Various industrial and electronic adhesives, such as UV glue, optical glue, glue for camera module assembly, glue for touch screen panels, glue for optical communication, glue for component assembly, low-temperature curing glue, conductive glue, underfill, dual-hardening UV glue, RTV silicone, solvent glue, and dual-SGA/AB glue.
UV Spot/conveyer curing systems , Process equipment ,Centrifuges and Filters , Marine machinery , Sputtering deposition target / materials for R&D, If you have any questions, please feel free to contact us.
︾UV System
︾Target Material
︾Process Equipment
︾
- Underfill Adhesives
-
Thermal Curable Adhesives
-
Introduction
-
- Used in handheld electronics
- Reworkable for BGA and CSP components
- Penguin Cement 991/991D— profect adhesion for BGA and CSP
-
Features
-
- Rapid curing in low-temperatures (500μm Thickness can be curing in 5s at 70°C)
- Component rework made possible and with excellent performance (example diagram)
- Storage at room temperature (20-30°C) with excellent performance
- Low viscosity and high permeability
- Excellent electrical insulation
- low halogen requirements (Cl<900ppm, Br<900ppm, and Cl+Br <1500ppm)
991 | 991D | Rference | |
---|---|---|---|
Standard curing Condition | 80°C x 10 min | 80°C x 10 min | - |
Viscosity(mPa.s) | 5400 | 27000 | BH Type 20°C |
Initial curing Time Required | 7 | 5 | 80°C/200μm |
Tg | -85 | -80 | TMA |
Adhesion(N/mm2) | 7.0 | 9.5 | FR-4 |
Water Absorbtion(%) | 0.85 | 1.00 | Boiled 2 hours |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886-2-2571-1191#308(Sam)、306(Akira)
- Low-Temperature Adhesives (Single Component)
-
Thermal Curable Adhesives
-
Introduction
-
- Low-temperature curable
- Excellent adhesion
- Suitable for non-heat resistance materials
- Low thermal expansion coefficient, low shrinkage when curing
- Extensive range of viscosity (low to high viscosity)
- Meets low halogen requirements (Cl<900ppm, Br<900ppm, and Cl+Br <1500ppm)
Ultra Low-Temperature Rapid Curing AE-901T-DA | Low-Temperature Rapid Curing AE-901R-DA | Ultra Low-Temperature Rapid Curing AE-901V | Low-Temperature Curing AE-810 | |
---|---|---|---|---|
Color/Appearance | Black, viscous liquid | Black, viscous liquid | Black, viscous liquid | Black, viscous liquid |
Viscosity | 16Pa.s | 16Pa.s | 18Pa.s | 30Pa.s |
TI Value | 2.0 | 3.0 | 2.0 | 2.0 |
Storage Condition | Below -10°C | Below -10°C | Below -10°C | Below -10°C |
Standard Curing Condition | 60°CΧ30min | 80°CΧ30min | 60°CΧ30min | 80°CΧ60min |
Tg Point | 45°C | 40°C | 47°C | 106°C |
Hardness | 70 | 70 | 75 | 74 |
Features | “Low CTE Low Shrinkage” |
“Long Pot Life Drop impact resistant” |
“Low bleed out Long Pot life” |
“High Tg Suitable for PA-9″ |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886-2-2571-1191#306(Akira)、308(Sam)
- Low-Temperature Conductive Adhesives (Ag Paste)
-
Thermal Curable Adhesives
-
Introduction
-
- Conductive
- Suitable for heat intolerant materials that require electrical conductivity
- Replace welding
- Rapid curing for improving productivity
- Solvent-free for reducing contamination
- Meets low halogen requirements (Cl<900ppm, Br<900ppm, and Cl+Br <1500ppm)
CA-46 | CJ-721 | CJ-727 | |
---|---|---|---|
Main Component | Silver power | Silver power | Silver power |
Color/Appearance | Silver color paste | Silver color paste | Silver color paste |
Viscosity | 11Pa.s | 27Pa.s | 70Pa.s |
TI Value | 2.8 | 3.2 | 4.5 |
Storage Condition | Below -10°C | Below -10°C | Below -10°C |
Standard Curing Condition | 100°CΧ30min | 80°CΧ60min | 80°CΧ60min |
Tg Point | 110°C | 88°C | 92°C |
Volume Resistivity | 3.0 * 10-3Ωcm | 12 * 10-4Ωcm | 5.0 * 10-4Ωcm |
Features | Low viscosity; High Tg | Low-temperature hardening; Highly dependable | Low-temperature hardening; Highly dependable |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886-2-2571-1191#306(Akira)、308(Sam)
- Complete Liquid Adhesives
-
Thermal Curable Adhesives
-
Introduction
-
- Non powder ; fully 100% liquid
- Suitable for small Slit; Infiltrates and curanle in smallest areas
- Minimal outgas, exponentially reducing contamination
AE-770(Halogen<1500ppm) | AE-780(Halogen<1500ppm) | |
---|---|---|
AE-780(Halogen<1500ppm) | Red viscous liquid | Red viscous liquid |
Viscosity | 7 Pa.s | 9Pa.s |
TI Value | 1.1 | 1.1 |
Storage Condition | Below -10°C | Below -10°C |
StandardCuring Condition | 90°CΧ60min | 90°CΧ60min |
Tg Point | 100°C | 101°C |
Hardness | D-87 | D-88 |
Features | Highly dependable; Solvent-free; Low outgassing | Highly dependable; Solvent-free; Low outgassing |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886-2-2571-1191#306(Akira)、308(Sam)
- Low-Temperature Curing Flexible Adhesives
-
Thermal Curable Adhesives
-
Introduction
-
- Flexibility
- One component;Good Operability
- Like Rubber; effectively absorbs and reduces stress from “mechanical impact” and “vibrations”
- Effective adhsion to many variety of materials
- Excellent adhesion
- Meets low halogen requirements (Cl<900ppm, Br<900ppm, and Cl+Br <1500ppm)
AE-403H | AE-421D | AE-421H | |
---|---|---|---|
Color/Appearance | Black, viscous liquid | Black, viscous liquid | Black, viscous liquid |
Viscosity | 7 Pa.s | 10 Pa.s | 19 Pa.s |
TI Value | 1.1 | 1.7 | 2.9 |
Storage Condition | Below -10°C | Below -10°C | Below -10°C |
Standard Curing Condition | 80°C Χ 30min | 80°C Χ 30min | 80°C Χ 30min |
Tg Point | 28℃ | 26℃ | 24℃ |
Water Absorption | 0.45% | 0.6% | 0.3% |
Features | High shear strength; Suitable for PT-9T, LCP, and PC materials | High shear strength; Suitable for PT-9T, LCP, and PC materials | High shear strength; Suitable for PT-9T, LCP, and PC materials |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886+2+2571-1191#306(Akira)、308(Sam)
- UV Adhesives for Optical Applications
-
UV Adhesives
-
Introduction
-
- Curing with UV Light in seconds
- Good Performance for enviroment test
- Available in various viscosities and adjustable upon customer request
- Highly transparent
- Storage at room temperature
- Meets RoHs and halogen requirements (Cl/Br < 900ppm, and Cl+Br < 1500ppm)
XVL-14L | XVL-90K | 8807-LK | 801SE-L | 5515 | 5517 | |
---|---|---|---|---|---|---|
Color/Appearance | Colorless transparent liquid |
Colorless transparent liquid |
Colorless transparent liquid |
Colorless transparent liquid |
Colorless transparent liquid |
Colorless transparent liquid |
Viscosity | 1300mPa.s | 3200mPa.s | 1400mPa.s | 3000mPa.s | 600mPa.s | 350mPa.s |
Curing Wavelength | 365nm | 365nm+Visible light | 365nm+Visible light | 365nm+Visible light | 365nm+Visible light | 365nm+Visible light |
Index of refraction | 1.52 | 1.52 | 1.52 | 1.52 | 1.518 | 1.510 |
Hardness | 70-A | 67-A | 60-D | 75-D | 20-A | 4-A |
Features | Soft and resilient after hardening | Superior perforamnce for all plastic types | Resilient skin; Superior adherence | Superior adherence strength | Low viscosity; Low elasticity | Low viscosity; Low elasticity |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886-2-2571-1191#308(Sam)、309(Cherry)、306(Akira)
- UV Adhesives for High-Precision Fixation
-
UV Adhesives
-
Introduction
-
- High adhesion: Excellent adhesion
- Good durability: stable, temperature-resistance, aging-resistant, and water resistant
- High-precision fixation: Low shrinkage, coefficient of linear thermal expansion, and extremes
- Meets low halogen requirements (Cl< 900ppm, Br< 900ppm, and Cl+Br < 1500ppm)
8803SA | 8833G | 8150 | 9300 | 9311 | |
---|---|---|---|---|---|
Meets low halogen requirements (Cl< 900ppm, Br< 900ppm, and Cl+Br < 1500ppm) | White liquid | Yellow liquid | White liquid | White liquid | White liquid |
Viscosity | 28000mPa.s | 26000mPa.s | 18000mPa.s | 47000mPa.s | 28000mPa. |
Curing Wavelength | 365nm | 365nm+Visible light | 365nm | 365nm | 365nm |
Hardening Depth | 3.0mm | 3.2mm | 2.6mm | 2.6mm | 3.9mm |
Hardness | 84-D | 86-D | 85-D | 88-D | 83-D |
Features | High-precision fixation; Suitable for PPS, plastic, and metal materials | High-precision fixation; Suitable for PPS, plastic, and metal materials | Rapid hardening; Superior adherence to plastic material | High Tg; Low shrinkage; Suitable for LCP, PPS, PC, and plastic materials | High Tg; Low shrinkage; Suitable for LCP, PPS, PC, and plastic materials |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886-2-2571-1191#308(Sam)、309(Cherry)、306(Akira)
- UV Adhesives for Lens Application
-
UV Adhesives
-
Introduction
-
- Excellent adhesions
- stable, temperature-resistant, and drop-resistance
- Good adhesion for plastic, PPS, metal, and magnetic materials
- Meets low halogen requirements (Cl< 900ppm, Br< 900ppm, and Cl+Br < 1500ppm)
8840L | 5301G2 | 5342H | 8120T3 | 8125T3 | |
---|---|---|---|---|---|
Color/Appearance | Yellow liquid | Yellow liquid | Yellow liquid | White liquid | White liquid |
Viscosity | 23000mPa.s | 10000mPa.s | 31000mPa.s | 12000mPa.s | 14500mPa.s |
Response Wavelength | 365nm | 365nm+Visible light | 365nm+Visible light | 365nm | 365nm |
Hardness | 70-D | 61-D | 70-A | 85-A | 50-A |
Features | Superior adherence to glass, PPS, plastic, and metal materials; Drop-resistant | Superior adherence to glass, PPS, plastic, and metal materials; Drop-resistant | Superior adherence to PPS, plastic, and metal materials; Temperature-resistant | Resilient skin after hardening; Weather-resistant | Resilient skin; Weather-resistant; Superior adherence |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886-2-2571-1191#308(Sam)、306(Akira)
- Dual-Curing UV Adhesives (UV and Heat)
-
UV Adhesives
-
Introduction
-
- UV curing provides initial Adhesion
- Shadow Areas cannot be cured by UV light can be baked to prevent incomplete curing
- Superior adherence for plastic, PPS, metal, and magnetic materials
5200LL | 5210 | |
---|---|---|
Color/Appearance | Light yellow liquid | Light yellow liquid |
Viscosity | 9500mPa.s | 38850mPa.s |
Curing Wavelength | 365nm | 365nm |
Curinging Depth | 80°C x 30分 | 80°C x 30分 |
Hardness | 83-D | 86-D |
Features | Superior adherence to LCP, PPS, plastc, and metal materials; High Tg | Superior adherence to LCP, PPS, plastc, and metal materials; High Tg |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886-2-2571-1191#308(Sam)、306(Akira)
- Adhesives for Touch Panels
-
UV Adhesives
-
Introduction
-
- Strong adherence; Low shrinkage
- Good durability: stable, temperature-resistance, aging-resistant, and water resistant
- Available in various viscosities and adjustable upon customer request
- Highly transparent
- Safe storage at room temperature
- Easily reworkable
HRJ-21 | HRJ-40 | HRJ-203 | |
---|---|---|---|
Main Component | Modified acrylic material | Modified acrylic material | Modified acrylic material |
Curing Conditions | 3,000mj/cm2 | 1,500mj/cm2 | 2,000mj/cm2 |
Viscosity (mPa s) | 3,400 | 3,500 | 3,200 |
Hardness | 9(A) | 17(A) | 20(OO) |
Shrinkage (%) | 3.3 | 2.3 | 1.0 |
Elasticity (MPa) | 0.2 | 0.6 | 0.04 |
Features | High transparency; Superior elasticity and adherence | High transparency; Low shrinkage and elasticity | High transparency; Low shrinkage and elasticity |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886-2-2571-1191#308(Sam)、309(Cherry)
- General UV Adhesives
-
UV Adhesives
-
Introduction
-
- One component,Good Operability
- Effectively absorbs, alleviates, and reduces the stress caused by “mechanical impact” and “vibration”
- Superior adherence to a variety of materials
- Strong adherence
- Meets low halogen requirements (Cl<900ppm, Br<900ppm, and Cl+Br <1500ppm)
U-3615 | U-407 | U-399 | U-420 | |
---|---|---|---|---|
Color/Appearance | Colorless/Transparent | Colorless/Transparent | Black liquid | Black liquid |
Viscosity | 110Pa.s | 40Pa.s | 22Pa.s | 40 Pa.s |
Curing Wavelength | 280~420nm | 280~420nm | 280~420nm | 280~420nm |
UV Curing condition | 2000mj | 2000mj | 3000mj | 3000mj |
Hardness | 85-A | 55-D | 65-D | 30-A |
Features | Soft and resilient after hardening; Drop-resistant; Rapid surface drying; Suitable for cable, BGA, and connector reinforcement | Superior adherence to plastic, PC, LCP, ABS, PPS, glass, and metal materials | Superior adherence to various materials; Superior black shading; Low shrinkage | Soft and resilient after hardening; Superior black shading; Low shrinkage |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886-2-2571-1191#308(Sam)、309(Cherry)、306(Akira)
- RTV Adhesives
-
UV Adhesives
-
Introduction
-
- One component, Good Operability
- Effectively absorbs, alleviates, and reduces the stress caused by “mechanical impact” and “vibration”
- Superior adherence to a variety of materials
- Strong adherence
- Meets low halogen requirements (Cl< 900ppm, Br< 900ppm, and Cl+Br < 1500ppm)
U-1262C | U-1264WL | S-181 | SF-200 | |
---|---|---|---|---|
Color/Appearance | Light yellow liquid | White liquid | Black, white, or transparent viscous liquid | White viscous liquid |
Main Meterial | Modified PU | Modified PU | Modified Silicone | Modified Silicone |
Viscosity | 17Pa.s | 6Pa.s | 50Pa.s | 60Pa.s |
Tack Free Time | 15分 | 30分 | 15分 | 15分 |
Standard Curing Condition | Allow to stand in room temperature for 24 h | Allow to stand in room temperature for 24 h | Allow to stand in room temperature for 24 h | Allow to stand in room temperature for 24 h |
Storage Condition | 25°C | 25°C | 25°C | 25°C |
Features | Superior adherence to PI, PET, PEEK, metal, and glass materials | Superior adherence to PI, PET, PEEK, metal, and glass materials | General glue; Water-resistance; Weather-resistant | General glue; Water-resistance; Weather-resistant; UL-QOQW2 compliant |
Due to the extensive amount of glue types, only a portion of the glues is displayed for your reference. Please contact us for more information concerning the different glues.
Contact:+886-2-2571-1191#308(Sam)、306(Akira)
- ANUP 5000
-
UV SPOT Light Curing Systems
-
Features
-
- Provides ideal curing conditions for target resin or objects
- Provides nine programmable phased illumination conditions, including phased and intermittent
- Host can be placed in vertically or horizontally to conserve space
- Host can be placed in vertically or horizontally to conserve space
- Compatible with thin UV sensors (thickness = 5mm; shared with UJ-35)
- Adjustable and easy to manage (illumination strength)
- Shared components, bulbs, optical fiber tubes with ANUP5204
-
Specifications
-
Power 100-240VAC 50/60Hz 2.8A Lamp (200W) 3000 hours (2000 hours guaranteed) UV Radiation Accuracy ±1.5% (UV radiation feedback = ON (when in use) UV Strength (Φ5Χ1) UV radiation distance: 10mm 4000mW/cm2 Illumination Mode Manual or automatic (fixed time) External Signal Output Yes External Signal Control Yes
- ANUP 5204(Discontinued)
-
UV SPOT Light Curing Systems
※ANUPS204 UV LAMP (Lamp) In Stock
-
Features
-
- Provides ideal hardening conditions for target resin or objects
- Provides nine programmable phased illumination conditions, including phased and intermittent
- Host can be placed in vertically or horizontally to conserve space
- Compact, lightweight, and energy-efficient (2.8A)
-
Specifications
-
Power 100-240VAC 50/60Hz 2.8A Lamp (200W) 3000 hours (2000 hours guaranteed) UV Radiation Accuracy ±1.5% (UV radiation feedback = ON (when in use) UV Strength (Φ5Χ1) UV radiation distance: 10mm 4000mW/cm2 Illumination Mode Manual or automatic (fixed time) External Signal Output Yes External Signal Control Yes
- ANUP 5252L (Discontinued)
-
UV SPOT Light Curing Systems
ANUPS252 UV LAMP (Lamp) In Stock
-
Features
-
- Strong energy illumination
- Easy to operate
-
Specifications
-
Power AC 90-120V 50/60Hz 5A Lamp(250W) 3000 hours (2000 hours guaranteed) UV Radiation Accuracy ±1.5% (UV radiation feedback = ON (when in use) UV Strength (Φ5Χ1) UV radiation distance: 10mm 5031mW/cm2 Illumination Format Manual or automatic (fixed time) External Signal Output Yes External Signal Control Yes
Contact:+886+2+2571-1191#306(Akira)、308(Sam)
- ANUJ 3000(UJ-30)
-
UV SPOT Light Curing Systems
-
Features
-
- Maximum output of 8000mw/cm2; features latest UV radiation illumination technology
- Easy to understand control panel, operation, and settings
- High-precision temperature feedback function (light source life is 20,000 hours)
- Three-step simple mode for setting the UV radiation in minimum time
- No fan design; No need for ventilation
-
Specifications
-
Power 100-240VAC 50/60Hz 4A Controller 80*125*140mm Power Consumption 60VA UV Strength Maximum output of 8000mw/cm2 Illumination Mode Manual or automatic (fixed time) External Signal Control Yes
- ANUJ 3500(UJ-35)
-
UV SPOT Light Curing Systems
-
Features
-
- Maximum output of 8000mw/cm2; features latest UV radiation illumination technology
- UV sensor connector and calibrator (only 5mm thickness)
- Easy to calibrate by connecting the RS232C with the computer
- High-precision temperature feedback function (lightsource life is 20,000 hours)
- Three-step simple mode for setting the UV radiation in minimum time
- No fan design; No need for ventilation
-
Specifications
-
Power 100-240VAC 50/60Hz 4A Controller 80*125*140mm Power Consumption 60VA UV Strength Maximum output of 8000mw/cm2 Illumination Format Manual or automatic (fixed time) External Signal Output Yes External Signal Control Yes
- ANUJ 5024(Discontinued) (UJ-20)
-
UV SPOT Light Curing Systems
-
Features
-
- Maximum output of 8000mw/cm2; features latest UV radiation illumination technology
- Easy to operate radiation sensor connector and calibrator using the RS232C
- High-precision temperature feedback function (light source life is 20,000 hours)
- Three-step simple mode for setting the UV radiation in minimum time
- No fan design; No need for ventilation
-
Specifications
-
Power 100-240VAC 50/60Hz 4A Controller 80*130*145mm Power Consumption 60VA UV Strength Maximum output of 8000mw/cm2 Illumination Format Manual or automatic (fixed time) External Signal Output Yes External Signal Control Yes
Contact:+886+2+2571-1191#306(Akira)、308(Sam)
- ANUP 3000
-
UV Conveyer Type Curing Systems
-
Features
-
- 0mm以內使用Ideal for products smaller than 100mm in width with illumination parameters within 50mm
- Easily adjusted according to product height and light tube illumination
-
Specifications
-
Power 220V 50/60Hz 15A Lamp 1.5kw x 1 Conveyer Speed 0.3~5m/min Possible Product Dimensions During Delivery 100mm(W) x 50mm(H) Effective Uniform Illumination Range 50mm Light Source Device Dimensions 805mm(L) x 300mm(W) x 400mm(H) Power Device Dimensions 450mm(L) x 310mm(W) x 160mm(H)
- ANUP 7300
-
UV Conveyer Type Curing Systems
-
Features
-
- Ideal for products smaller than 300 mm in width with illumination parameters within 200 mm
- Easily adjusted according to product height and light tube illumination
- Easily integrated with peripheral equipment to form production lines
-
Specifications
-
Power 220V 50/60Hz 15A Lamp 2kw x 1 Conveyer Speed 0.3~5m/min Possible Product Dimensions During Delivery 300mm(W) x 100mm(H) Effective Uniform Illumination Range 200mm Light Source Device Dimensions 1200mm(L) x 600mm(W) x 1100mm(H)
- ANUP 8000
-
UV Conveyer Type Curing Systems
-
Features
-
- Easily linked to light and power sources
- When the light timer is switched, the cooling mechanism of the light tube automatically starts or stops
- Equipped with a voltmeter and timer
-
Specifications
-
Power 220V 50/60Hz 15A Lamp 1.5kw x 1 Power Source Dimension 450mm(L) x 310mm(W) x 160mm(H) Power Source Weight 約25kg
Contact:+886+2+2571-1191#306(Akira)、308(Sam)
- HDD – Hard Disk Materials
-
Target Material
-
Introduction
-
Recording Films CoCrPt-SiO2 (※), CoCrPt-TiO2, CoCrPt-Cr2O3, CoCrPt-O, Fe3O4, CoCrPt-B, FePt, FePt-X, FePt-MgO(-SiO2, -ZrO2) etc. Soft Magnetic Films Fe-C, Fe-Si, Fe-Ta-C, Fe-Ta-N, Co-Zr-Nb, Fe-Al-Si, ZnFe2O4, (Zn,Mn)Fe2O4, (Zn, Ni)Fe2O4 etc. Antiferromagnetic Films Ir-Mn, Pt-Mn, Ru, Ru-Rh etc. Undercoat Films CoCr-SiO2, CoCr-TiO2, Ru-SiO2, Ru, Ru-Co, Ru-Cr, Ni-Ta, Co-Pd etc. Seed Films MgO, CoO, NiO, Ni3P, Ni-Al etc. Half-MetallicFerromagnetic Films
for half-metallicferromagnetic films(La1-XSrX)MnO3, Sr2FeMoO6, Sr2CrReO6, Ca2FeReO6, Co2Mn(-Ge, Al, Si), Co2FeSi, Co2(Cr1-xFex)Al, Fe3O4etc.
It is most watched material 1st generation’s perpendicular magnetic recording media.High magnetic anisotropy (Ku), with low noise has been testified.
- Mass Production and R&D Target and Spin-OnMaterials for Semiconductors, Optical Technology, and Recording Media
-
Target Material
-
Introduction
-
- Toshima provides all types of sputtering deposition and evaporating target materials required for mass production and R&D by industries and research organizations. These fields include:
- Hard Disks
- Optical Media and Materials
- Display Materials
- Ferroelectrics and Electrode Material
- Superconductor Materials
- Battery Materials
- Thermoelectric Materials
Toshima is highly reputable in the industry for its product quality and services. Toshima can tailor products according to customers’ required specifications, compositions, or dimensions, regardless of quantity.Please contact us if you require such materials.
- Optical Media and Materials
-
Target Material
-
Introduction
-
Recording Films Ge+α(Bi, In, Te….), Bi4Ti3Sn, GeSbTe,AgGeSbTe, GeSbTe etc. Protective Films ZnS-SiO2, Al2O3, NbOx, ZnO-α, SiC, Si3N4, B-Si, SiO2, SiAlNx etc. Reflective Films Ag合金(TOSHIMA “AGC-series”), Al合金etc. Interfacial Layers Cr2O3, GeCr, GeAl, SiC, AlN, TiO2, Nb2Ox, ZrO2, Ta-SiO2, Nb-SiO2, ZnO etc. Antireflection Layer High-n:TiO2, Nb2Ox, SrTiO3 etc., Low-n:SiO2, SiAlN etc.
TOSHIMA always lay emphasis on development, creation new material for thin film aiming to the tip of new generations.
- Display Materials
-
Target Material
-
Introduction
-
Moisture Protective Films Si3N4, Si3N4-Si, Si-α etc. Moisture Getters SrO2, CaOx, Sr(DPM)2, Ca(DPM)2 etc. Electron Implantation Layers Li2O, LiF, CsF, alkali metal complex, etc. Metal Electrodes Ag alloy (TOSHIMA “AGC-series”), Al alloy, Cu alloy, Pt-Cr, Mg-Ag, Mg-AI, etc. Transparent Electrodes ITO, ZnO-X, SnO2-X, TiO2-X etc. Antireflection Layers High-n:TiO2, Nb2Ox, SrTiO3 etc., Low-n:SiO2, SiAlN etc.
For your further interest, we can take order for the test production of new developments according to the purposes.
- Ferroelectrics and Electrode Material
-
Target Material
-
Introduction
-
Ferroelectrics * available in various composition PZT, PZTN, PLZT, PLT, PNN, KTN:K(Ta, Nb)O3, KNbO3, (Li, K)NbO3, BNT:(Bi, Nd)4Ti3O12, BLT:(Bi, La)4Ti3O12, SBT:SrBi2Ta2O9etc. Control Gates(used high-k materials) La2O3, La2O3-MOx, HfO2, ZrO2, Y2O3, HfO2 -Al2O3, HfO2 -SiO2 etc. Thin Film Condensers STO: SrTiO3for DC sputtering BST: (Ba, Sr)TiO3for high-rate sputtering, etc. Electrodes Pt, Ir, IrO2, Ru, RuO2, SrRuO3, LaNiO3, NdNiO3, (La,Sr)CoO3, Ti, TiN, TiOX, Ta etc.
TOSHIMA provides highly dense and almost single phase sputtering targets with its unique technology.
- High Temperature Superconductor Materials
-
Target Material
-
Introduction
-
Y type Nd type Sm type Gd type Mixed Crystal type Buffer layer YBa2Cu3OX, Y2BaCuOX, substitution type NdBa2Cu3OX, Nd4Ba2Cu2OX, substitution type SmBa2Cu3OX, Sm2BaCuOX, substitution type GdBa2Cu3OX, Gd2BaCuOX, substitution type RE-BaCuOX(RE:Nd,Sm,Eu, Gd, substitution type) SrTiO3,LaAlO3, YAlO3,MgO, YSZ,CeO2, BaSnO3,Gd2Zr2O7, BaO2,CaO2,SrO2,LaNiO3(Sr1-XLaX)TiO3,SrAl0.5Ta0.5O3, SrAl0.5Nb0.5O3
- Battery Materials
-
Target Material
-
Introduction
-
Solid Oxide Fuel Cell (SOFC) Cathodes LSM, LSC, SSC, LaNiO3, Bi2Ru2O7, Pb2Ru2O7-X, LSC-YSZ, SSC-SDC etc. Electrolyte YSZ, SDC, YDC, GDC, SDZ, BCY:BaCeYO3, LSGM etc. Anode NiO-YSZ, NiO-SDC, Ni-BCY, Ni-YSZ,Ni-SDC etc. Thin Membrane Battery Anodes Li3PO4, LiCoO2, LiNiO2, LiMn2O4+α, LiFePO4, LiCoPO4 etc. Cathodes Sn-Si,Si-Cu,Si-Mn,Si-Co,Sn-Si-Cu,Sn-Si-C,Li4Ti5O12 etc. 各種薄膜型太陽電池 Various Thin Membrane Solar Batteries Anti-Reflection Films MgF2, MgF2-SiO2, SiO2-TiO2, NbOx etc. Transparent Electrodes ZnO-Al2O3, ZnO-(Ga2O3, GaN, SnO2-Sb2O3 etc. Buffer Layers ZnO, ZnS, ZnxMg1-xO etc. Light Absorption Layers Si-Ge, Cu-In, Cu-Ga etc. Transparent Semiconductor Layers InGaZnO4, SnO2, SrCu2O2, CuAlO2, CuCrO2, various delafossite substitutes
-
Introduction
-
metals oxides Bulk combinations Zn4Sb3, (Zn4Sb3+α)CoSb3, Co(Sb3-XTeX)Bi2Te3,BiTe+α,BiSbTe,FeSi2,SiGe etc. YxSrn+1TinO3n+1,(Na1-XCaX)Co2O4,NaXCo2O4(La1-XSrX)CoO3,Ca3Co4O9,(Ca3-XSrX)Co4O9 etc. Bi2Te3/CoSb3,Bi2Te3/ Zn4Sb3CoSb3/Zn4Sb3 etc.
TOSHIMA can deal various kinds of other doping-type, substitution-type materials in addition to the above, from which it’s at research people’s request.
Published Research Data on the Co-Development of Industry Technologies
Source: 2005 Annual Thermoelectric Inversion Academic Society
Contact:+886-2-2571-1191#309(Cherry)、300(Nakahico)
- Marine Machinery
-
Equipment sales agent
Flutek .Co.,Ltd(Kawasaki Group)
-
Equipment
- Hydraulic and electric steering gear and deck machinery for ships Building market www.flutek.co.kr
- Centrifuges and Filters
IHI Rotating Machinery Egineering Co., Ltd.
-
Equipment
- Silicon Wafer Slurry recycling Systems, Distillers, Horizontal & Guinard centrifuges, FUNDABAC& Leaf Filters
https://www.ihi.co.jp/separator/tw/products/index.html
JSWAFTY Corporation: ECR Deposition System |
-
Equipment
- ECR Deposition System
Daito Industry Co., Ltd. |
-
Equipment
- automated laser To-Can capsealers and customized automated machine
Contact:+886+2+2571-1191#300(Nakahico)